SATA AE5151 Bedienungsanleitung Seite 29

中文
AE5151/AE5151-3 EN DE RU KO PT JA ES
4.9 Installation of balance wire rope
Make sure that the left and right sliding tables are at the first safety position, and then install the balance wire rope as per the track shown
in the figure. Do not tighten the nut temporarily as the tension of two wire ropes will be adjusted for synchronization later on. Attention:
The unilateral wire rope screw must be tightened with 2 hexagon nuts.
Wire rope
Rope sheave
M16 nut
Sliding table
29