Energy Saving Tips; Using The Cooler - Dometic WAECO BordBar AS-25 Bedienungsanleitung

_AS-25.book Seite 18 Montag, 16. Januar 2012 9:55 09
Operation
5.1
 Choose a well ventilated installation location which is protected against di-
 Allow warm food to cool down first before placing it in the device to keep
 Do not open the cooling device more often than necessary.
 Do not leave the lid open for longer than necessary.
 Clean the lid seal regularly.
 If you want to set an increased energy efficiency and a limited cooling
5.2
a
I
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable (2 1, page 3) into the cigarette light-
or
➤ Plug the 220-240 V connection cable (2 2, page 3) into the AC voltage
18
Downloaded from www.Manualslib.com

Energy saving tips

rect sunlight.
cool.
capacity for the cooler unit, use the cooler's ECO mode.

Using the cooler

Caution
– Ensure that the objects placed in the cooler are suitable for
cooling to the selected temperature.
– Ensure that food or liquids in glass containers are not exces-
sively refrigerated. Liquids expand when they freeze and can
therefore destroy glass containers.
– Ensure that your cooler is well ventilated so that any heat creat-
ed can dissipate. Otherwise proper functioning cannot be en-
sured. It is especially important not to cover the air vents.
– Risk of spillage. Lift the cooler by the handle, not by the shoul-
der strap.
Note
If the handle is folded back of if the cooler is being carried, the lid
is locked. You can only open the lid when the handle is folded for-
wards.
er socket or a 12 V socket in the vehicle
socket and connect it to the 220-240 V AC mains supply.
manuals search engine
BordBar AS-25
EN