Setting The Alarm - Philips goLITE BLU HF3331 Bedienungsanleitung

EnglisH
18

setting the alarm

The alarm has three modes: chime only, light only or both chime and light.
1 Press the on/off button briefly to switch on the appliance (Fig. 8).
The touchscreen display goes on.
,
2 Press the alarm button (Fig. 14).
The alarm indications start to flash (Fig. 15).
,
3 Press the plus or minus button to switch between the three alarm
modes: chime only, light only or both chime and light (Fig. 11).
4 Press the alarm button twice or wait 10 seconds to store the
selected mode.
5 To set the alarm time, press the alarm button twice.
The alarm time starts to flash.
,
6 Press either the plus or the minus button to set the desired time. If
you keep the button pressed, the time moves forward or backward
quickly.
7 Press the alarm button or wait 10 seconds to store the set alarm
time.
Note: The set alarm mode and time remain stored in the memory as long as
there is energy in the battery.
switching off the alarm sound
1 Press any of the touchscreen buttons or the on/off button to
switch off the alarm sound when the alarm goes off.
Disabling the alarm
1 To disable the alarm, press and hold the alarm button until the
alarm chime and the alarm light indications as well as the alarm
time disappear from the display.
4222.002.7505.1.indd 18 05-06-09 12:26