ASROCK B560M Steel Legend Handbuch Seite 25

Serial ATA3 Connectors
Right Angle:
(SATA3_2:
see p.1, No. 11) (Upper)
(SATA3_3:
see p.1, No. 11) (Lower)
(SATA3_4:
see p.1, No. 12) (Upper)
(SATA3_5:
see p.1, No. 12) (Lower)
Vertical:
(SATA3_0:
see p.1, No. 15)
(SATA3_1:
see p.1, No. 14)
USB 2.0 Headers
(9-pin USB3_4)
(see p.1, No. 19)
(9-pin USB5_6)
(see p.1, No. 18)
USB 3.2 Gen1 Header
(19-pin USB3_5_6)
(see p.1, No. 9)
Front Panel Type C USB
3.2 Gen2x2 Header
(20-pin F_USB3_TC_1)
(see p.1, No. 10)
SATA3_0 SATA3_1
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+ GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
USB Type-C Cable
B560M Steel Legend
These six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_2 is occupied by
a SATA-type M.2 device,
SATA3_1 will be disabled.
There are two headers
on this motherboard.
Each USB 2.0 header can
support two ports.
There is one header on
this motherboard. This
USB 3.2 Gen1 header can
support two ports.
There is one Front
Panel Type C USB 3.2
Gen2x2 Header on this
motherboard. This header
is used for connecting a
USB 3.2 Gen2x2 module
for additional USB 3.2
Gen2x2 ports.
21