Klarstein AeroVital Cube Bedienungsanleitung Seite 31

• As long as the program has not been started yet, the start delay can be cancelled
by pressing the PRESET button
instead , the display will show the time of the selected program and not the
setting of the start delay function!)
• After selecting the desired time to start, press the ON/OFF button to complete the
start delay settings. Except of the ON/OFF button and the LIGHT button
other buttons are now blocked. The start delay function can now only be cancelled
by pressing the ON/OFF button again. The program starts after the set lead time
has elapsed.
Cooking finish
1. The appliance beeps three times at the end of the preparation time and stops
heating. The fan continues to run for one minute until the temperature inside begins
to drop.
2. Open the door and remove the basket of prepared food. Place the basket on a flat,
heat-resistant surface.
Note: When removing the basket from the appliance, do not touch the basket with
your bare hands. Use oven gloves.
TIP: If the food has not yet been fully cooked, put it back in the basket and let it cook for
a few minutes longer in the appliance.
3. Place the prepared food on a plate or other dish (see figure below).
4. After use, switch off the appliance and unplug the power plug from the socket.
. (ATTENTION: If you press the TIME button
all
EN
31