DETOMASO Inchiostro DT2035 Bedienungsanleitung Seite 16

EN
Changing the background colour.
There are 3 display modes: White characters on a black background, black
characters on a white background, as well as a alternating display mode. This
means that from 6:00 until 18:00 white characters on a black background
will be displayed, and from 18:00 until 6:00 black characters on a white
background will be displayed. The default mode is black characters on a white
background. Hold button B for 2 seconds to switch to white characters on a
black background. Hold button B for a further 2 seconds to switch to alterna-
ting display mode.
Date display
Briefly pressing button B switches to the date display. After 10 seconds your
clock will switch back automatically to time mode.
Setup mode
To set the time, hold button A for more than 2 seconds: The hour display
begins to flash. Briefly pressing button A displays the next flashing hour digit,
whilst briefly pressing button B displays the previous one. After setting the
hour, hold button A for 2 seconds and the minutes will start to flash.
16