DETOMASO Adrenaline DT-W1003 Bedienungsanleitung Seite 16

EN
Operating instructions
Setting the time
1. Pull out the crown into the 2nd position
2. Move the hour and minute hand by turning the crown clockwise
3. Push back the crown into the normal position.
Setting the date
1. Pull out the crown into the 1st position
2. Set the date by turning the crown clockwise.
3. Push back the crown into the normal position after the date has been
adjusted.
Do not set the date between 9 pm and 1 am.
Chronograph – simple use of the stop watch
1. Push button A to start the Chrono (stop watch)
2. Repush button A to stop the function
3. Push button B to reset to zero
16