hanseatic HKGK16655DNF Gebrauchsanleitung Seite 56

Page EN-24 Changing the door hinges
14. Use a 10 mm spanner to unscrew
the hinge pin from the lower hinge
plate (13). Screw the pin back in on the
opposite side.
15. Screw the hinge plate (13) back onto the
left side.
16. Screw in the self-tapping screw on the
right side.
17. Screw both appliance feet (5) back on.
18. Reposition the appliance upright.
19. Remove both blind plugs on the left-
hand side from around the middle hinge
and insert them into the threaded holes
on the opposite side.
(13)
(13)
(5)
20. Remove the blind plug from the top of
the freezer door and insert it into the
hole on the opposite side.
21. Reinsert the freezer door and close the
door.
(12)
22. Insert the plastic ring over the lower pin
of the middle hinge (12).
23. Position the middle hinge (12) onto the
freezer door and screw it on tightly.
24. Position the fridge door on the middle
hinge (12) and close the door.
(10)
25. Place the upper hinge plate (10) on the
fridge door and then screw the hinge
plate tight using the three Phillips-head
screws.
(14)
26. Put the hinge cover (14) supplied in the
packaging on the hinge plate (10) and
screw the hinge cover tight.