Using The Flash - Canon WP-DC26 Benutzerhandbuch

4
Use the screen to compose the
shot. Press the shutter button
halfway and wait until the
indicator lights green or orange.
After it lights, press the shutter
button all the way.
• Make sure that the lens window is always
clean.
• Ensure that your fingers do not obstruct the
lens window, flash or diffusion plate when
shooting.
• If the power saving function activates and
shuts off the power, press the power button
again.
5
When you are finished, press the
power button to turn off the
camera.

Using the Flash

In order to evenly distribute light from the flash,
please attach the diffusion plate.
• Do not scratch the surface of the diffusion
plate, as this may prevent flash light from
being diffused properly.
• Attach the diffusion plate for flash
photography because image edges may
darken otherwise. Please note, however,
that the effectiveness of the diffusion plate
may be impaired if the subject is too close to
the camera.
15