AFRISO EURO-INDEX DA 10 Betriebsanleitung Seite 66

8.3 Parameterisation
The values are set as follows:
Measuring range:
1. Parameter selection → analogue value 1/2 → input "4 ... 20 mA" → man-
ual → minimum/mA "004.00" → maximum/mA "020.00"
Scaling
2. Parameter selection → analogue value 1/2 → scaling 1/2 → unit "litres"
→ scaling 2/2 → min/litres "0000.0" → max/litres "5000.0"
Analogue output
3. Parameter selection → analogue value 2/2 → output 1 → min/mA "04.00"
→ max/mA "20.00"
Delay
4. Parameter selection → limit → limit 1/2 → limit A → function "rest" → o.SP
"0200.0" → u.SP "0200.0" → limit A 2/2 → save "no" → delay "002"
5. Parameter selection → limit → limit 1/2 → limit B → function "working" →
o.SP "4900.0" → u.SP "4900.0" → limit B 2/2 → save "no" → delay "002
Simulation
6. Parameter selection → function 1/2 → simulation 1/2 → min/litres
"0000.0" → max/litres "5000.0" → delate/litres "0050.0" → simulation 2/2
→ timestep/s "001" → mode "off"
Function
7. Parameter selection → function 1/2 → characteristic → characteristic 1/2
→ function "horiz. cyl." → points "24"
Example
DA 10/12/14
EN
31