5.3
Electrical connection
ELECTRIC SHOCK CAUSED BY LIVE PARTS
•
Disconnect the mains voltage supply before performing the work and ensure
that it cannot be switched on.
•
Verify that no hazards can be caused by electrically conductive objects or
media.
•
Verify that the power supply and the signal inputs are protected against over-
voltage.
Failure to follow these instructions will result in death or serious injury.
VOLTAGE PEAKS WHEN INDUCTIVE CONSUMERS ARE SWITCHED OFF
When inductive consumers are switched off, this can cause voltage peaks and
can lead to adverse effects on electrical systems and may destroy the switching
contact.
•
Use commercially available standard RC circuits such as 0.1 µF/100 Ohm for
inductive consumers.
Failure to follow these instructions can result in equipment damage.
INCORRECT HANDLING
•
Verify that the contact rating is not exceeded.
Failure to follow these instructions can result in equipment damage.
Mounting
DANGER
NOTICE
NOTICE
DA 10/12/14
EN
14