Specifications - Makita BHP343 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger
3-1. Reversing switch lever
4-1. Speed change lever

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
For Model BHP343
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration
determined according to EN60745:
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 2.5 m/s
Work mode : drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Downloaded from www.Manualslib.com
Explanation of general view
5-1. Adjusting ring
5-2. Action mode changing ring
5-3. Graduation
5-4. Arrow
6-1. Adjusting ring
6-2. Action mode changing ring
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
-1
)
Low (1)
High (2)
-1
)
Low (1)
Overall length
Net weight
Rated voltage
) : 80 dB(A)
pA
Wear ear protection.
total value (tri-axial vector
2
) : 10 m/s
h,ID
2
2
) : 2.5 m/s or less
h,D
2
manuals search engine
BHP343
10 mm
10 mm
25 mm
5.1 mm x 63 mm
211 mm
1.4 Kg
D.C. 14.4 V
ENE039-1
For Model BHP453
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
ENG104-1
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration
determined according to EN60745:
Work mode: impact drilling into concrete
Vibration emission (a
ENG203-2
Uncertainty (K) : 1.5 m/s
sum) Work mode : drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
ENG302-2
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
3
6-3. Graduation
6-4. Arrow
7-1. Sleeve
8-1. Blow-out bulb
BHP453
13 mm
13 mm
36 mm
6 mm x 75 mm
6 mm
0- 1,300
0 - 400
0 - 19,500
0 - 6,000
232 mm
1.7 Kg
D.C. 18 V
) : 78 dB(A)
pA
Wear ear protection.
total value (tri-axial vector
2
) : 7.5 m/s
h,ID
2
2
) : 2.5 m/s or less
h,D
2
ENG104-1
ENG203-2
sum)
ENG302-2
ENG901-1