Overmax Camspot NVR 4.0 Benutzerhandbuch Seite 84

Step 2: After first activation, you will be required to create a user.
Follows steps below:
To register in the application, click [Register] and then read and accept the
EN
Privacy Policy. Enter phone number or e-mail address. Enter verification code.
Enter password. Press [Finish] to register. After registration, you will log in
automatically (fig. 54).
Note: If you forget your password, click [Forgot password?] and follow the
instructions, a new password will be sent to your registered mailbox.
Step 3: Add devices. Press plus in the upper right corner in the main menu of
the application, or [add device]. Press a key in the upper right corner to scan
code of ID cloud in NVR interface. Automatically add device after scanning it.
Press [Finish] after adding (fig. 55).
Step 4: Description of mobile application function:
Preview interface in real time (fig. 56).
1.
Settings and management
2.
Wi-Fi signal strength
3.
Volume adjustment
4.
SD/HD
5.
Image extension
6.
Screenshot
7.
Microphone
8.
Record
9.
Play video
10. Cloud
11.
Control
To have access to video preview from the camera via online browser, run „Overmax
Control" application, click add device and then scan QR code displayed in the
browser of your PC.
Live camera preview available here: https://ipc-eu.ismartlife.me/login