Unique Cases - Overmax Camspot NVR 4.0 Benutzerhandbuch

Human detection alarm:
[CAM] Choose a suitable channel number to set it.
EN
[Period] The device will activate the motion detection alarm in a specific period of time.
[Delay] Image loss means the alarm is over. It will stop for 10-300 seconds.
[Show message] In NVR preview you will see information on activation of alarm
when the message is displayed.
[Buzzer] When the alarm sets off, the device emits two long sounds.
[Recording channel] Choose channel to set motion detection area (fig. 44).

4.5.9 Unique cases

Unique cases are malfunctioning of the hard drive and insufficient memory
on the drive.
Drive error (fig. 45):
When space on hard drive is insufficient, NVR may display two messages:
[Show message] In NVR preview you will see information on activation of alarm
when the message is displayed.
[Buzzer] When the alarm sets off, the device emits two long sounds.
No space on drive (fig. 46):
When space on the drive is insufficient, NVR may display two messages:
[Lower limit] Hard drive may reserve space between 5 and 30G.
[Show message] In NVR preview you will see information on activation of alarm
when the message is displayed.