Image Settings; Preview Settings; Coding Settings; Advanced Settings - Overmax Camspot NVR 4.0 Benutzerhandbuch

4.4.1 Image settings

Description of function: Set IPC channel image parameters: brightness, contrast,
shade, saturation, image sharpness, image quality, image format, vertical and
horizontal rotation, backlight compensation, intensity of dynamic width and
digital dynamic width.
Steps:
1.
Press the main system interface with a right key of the mouse and select
[IPC configuration]. Image options interface will run by default.
2.
You can adapt camera parameters to your needs. Press [Apply] and then
[OK] to save settings (fig. 26).

4.4.2 Preview settings

Description of function: IPC channel title change key, channel position, channel
name, font size, time title switch, time position, automatic time size setting.
Steps: In IPC operating interface press [Live set]. Activate or deactivate channel
title and time title display. Set title position and font size. Press [Apply] and
then [OK] to save parameters (fig. 27).

4.4.3 Coding settings

Description of function: Check coding of IPC primary and secondary stream,
resolution, transmission rate, key frame interval, stream values, number of key
frames and other information.
Steps: In IPC configuration interface press [Coding] to enter interface coding
settings. You can only check information. The application does not allow you
to modify functions (fig. 28).

4.4.4 Advanced settings

Description of function: IPC motion detection and human recognition, adaptation
EN