Alarm Functions - Overmax Camspot NVR 4.0 Benutzerhandbuch

4.5.8 Alarm functions

Description of function: Alarm function options: video loss alarm, motion
detection alarm, human detection alarm.
EN
Image loss:
[CAM] Choose a suitable channel number to set it.
[Period] The device will activate the motion detection alarm in a specific period
of time.
[Show message] In NVR preview you will see information on activation of alarm
when the message is displayed.
[Buzzer] When the alarm sets off, the device emits two long sounds (fig. 42).
Motion detection:
[CAM] Choose a suitable channel number to set it.
[Period] The device will activate the motion detection alarm in a specific period
of time.
[Delay] Image loss means the alarm is over. It will stop for 10-300 seconds.
[Show message] In NVR preview you will see information on activation of alarm
when the message is displayed.
[Buzzer] When the alarm sets off, the device emits two long sounds.
[Recording channel] Choose channel to set motion detection area (fig. 43).