Weidmuller HPG 60 Betriebs- Und Wartungsanleitung Seite 29

click-sound can be heard and the pump handle can be pushed through
easily. Now both dies should lie completely on top of each other.
In order to open the dies turn the pump handle (see Figure 1 on page 24)
6
into the return position (<=||=>).Therefore, the pump handle needs to be
turned left bei 20°. In this position the pump handle is entirely closed. This
process activates the oil reflux. Additionally, the piston moves in its start
position.
Because of a fault the piston can move backwards at any time.
7
Remove the cable lug/connector. For this purpose open the crimp head if
8
necessary.
Whenever several crimpings are necessary start crimping from the flange to
the end of the sleeve (see Figure 3 on page 29). You find the minimum
amount of crimpings in the current Weidmüller crimping-instructions.
When processing connectors, the mentioned number of crimpings has to be
dedicated to each side of the connector.
Figure 3 Working direction for crimpings
2635530000/00/10.2018
Operating
29