Weidmuller HPG 60 Betriebs- Und Wartungsanleitung Seite 21

Before each usage the tool must to be checked for damage and /
or abrasion. When detecting visible damage you're not allowed
to work with the tool in any case.
NOTICE
Only our Weidmüller Interface GmbH & Co. KG service departe-
ment is allowed to carry out necessary repairs.
• Before finishing a crimping control whether the two halves of the dies lie
completely on top of each other. Only this guarantees an accurate crimping.
• Before starting to work, control that the latch has been snapped in the
shackle completely.
• Pay attention to the necessary number of crimpings illustrated on the con-
nection material.
• This instruction manual has always to be available when using the tool.
• Take care that only persons who have acquainted themselves with this
manual before processing and who have understood it are allowed to work
with the tool.
2635530000/00/10.2018
CAUTION
Introduction
21