Hints On Disposal - Klarstein 10012195 Handbuch

EN
20
Error codes
E0 Internal circuit error
E1 Without cookware or Incompatible
cookware used
E2 Internal overheat
E3 Over-voltage
E4 Under-Voltage
E5 Top plate sensor open/short circuit
E6 IGBT sensor open circuit/short circuit
E7 Top plate overheat
If the above remedies/controls can not fix the problem, unplug the appliance
immediately, contact service Centre for inspection and repairing, note the error code
and report it to Service Centre Ltd. To avoid any danger and damage to the appliance,
do not disassemble or repair it by yourself.

HINTS ON DISPOSAL

According to the European waste regulation 2012/19/EU this
symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should
be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of
this product. For more detailled information about recycling of
this product, please contact your local council or your household
waste disposal service.
When showing error signal E1, E2
and E7, please check whether the
cookware is not suitable, or switch on
the appliance again after it is cooled
down naturally. When showing E0,
E3-E6, please contact service Centre
for checking and repairing.