Inhaltsverzeichnis
Werbung
Quick adjust of sound and picture parameters
1. Push RC button OK or MENU which is on the front of TV panel. You will
see the regulation's bar VOLUME on the screen. Using the RC button OK
or TV button MENU, you can select the picture parameters: BRIGHTNESS,
CONTRAST, SATURATION and SHARPNESS.
<
>
2. Push RC button
or
, or buttons P+, P- which are in the front of TV panel,
set the parameter which you want.
Notes:
1. It is possible to regulate the sound just pushing RC button
there is no selected any sound or picture parameter.
2. The regulation bars of parameters turn of approximately in 3 seconds after
the last action.
Regulation of sound parameters
1. Push the RC button OK and keep it about 2 seconds, until the MENU
table will appear on the screen.
<
>
2. Push RC button
or
. The table SOUND will appear on the screen.
<
>
3. Push RC button
or
and set the sound's level which you want.
4. Select parameter BALANCE with RC keys
<
>
keys
or
set a desirable volume balance between volume
channels.
5. Select parameter AVL (automatic volume level) with RC keys
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
you select version OPERATE,
<
>
. If pressing RC keys
or
during translation a fixed volume level will be maintained automatically. If you select version
STANDARD – AVL this function will be disabled.
6. Select parameter EFFECT with RC keys
WIDE, the volume will be reproduced with a dimensional effect. If you select version OFF
this function will be disabled.
7. Select parameter SOUND AV with RC keys
what volume signal -MONO or STEREO - you will receive from exterior signal sources via AV inputs.
8. If the receiving channel is broadcast with two language volume, select parameter LANGUAGE
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
with RC keys
, while by pressing RC key
LANGUAGE2.
9. The set parameters must be memorised. Select line MEMORY with keys
<
>
or
. A red bar will appear what means a successful memorisation.
Equaliser.
10. To set a desirable characteristic of the volume channel you may use an equaliser function. Select
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
line EQUALISER with RC keys
. Press RC key
on the TV screen. Select one of five available modes: PERSONAL (values are set in the table of
frequencies hereunder by selecting certain frequency with RC keys
<
>
), STANDARD, VOICE, MUSIC and FILM.
is set with RC keys
or
VOLUME
BRIGHTNESS
CONTRAST
SATURATION
SHARPNESS
<
>
or
, when
MENU
SOUND
PICTURE
VIEW
CLOCK
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
. By pressing RC
AUTOSEARCH
MANUAL SEARCH
EDIT
OPTIONS
PROGRAM TUNE
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
<
>
. If pressing RC keys
or
you select version
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
<
>
. By pressing RC keys
or
you may select
<
>
or
select a desirable language LANGUAGE1 or
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
and press RC key
<
>
or
. Table SOUND/EQUALISER will appear
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
, while a desirable value
26
11. The set parameters must be memorised. Select line STORE with
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
keys
and press RC key
means a successful memorisation.
15
12. To return to table VOLUME, press RC key OK.
Headphones.
15
13. The TV set (if appropriate to a certain model) has a possibility
15
of an independent volume control. Select line HEADPHONES with RC
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
keys
. Press RC key
15
appear on the TV screen.
15
14. Select the parameter to be adjusted: volume, balance, high or
low frequency strengthening, language with RC keys
language volume signal is broadcast, while set a desirable volume
<
>
with RC key
or
.
15. The set parameters must be memorised. Select line STORE with
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
keys
and press RC key
a successful memorisation.
16. To exit from MENU table press RC key OK three times.
Note: The red button of the remote control is used to get directly into
the VOLUME menu.
Remote control button
Selection of five defined settings: "PERSONAL" (to be set in
VOLUME menu), "STANDARD", "LANGUAGE", "MUSIC" and
"MOVIE".
Remote control button I/II in TV mode- button to select DUALI/DUALII for two-channel
transmissions.
In teletext - button to select the teletext languages.
1. Push the RC button OK and keep it about 2 seconds, until the MENU
table will appear on the screen.
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
2. Using RC buttons
<
3. Push RC button
or
screen.
4. Using RC buttons
parameter for regulation: BRIGHTNESS, CONTRAST, SATURATION
or SHARPNESS.
<
5. Using RC button
or
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
6. Using RC buttons
>
you can select desired colour of picture: NORMAL (neutral, grey),
WARM (pink), COLD (bluish).
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
7. Using RC buttons
<
>
button
or
you can select desired level of noise reducion: OFF,
WEAK, MIDDLE, STRONG.
8. You can select one of four fixed modes of picture parameters.
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
Using RC buttons
>
you can select desired modes of picture parameters: PERSONAL,
(it suits the fixed meanings in the table PICTURE), STANDARD,
DYNAMIC (enlarged contrast), SOFT (reduced contrast).
<
>
or
. A red bar will appear what
<
>
or
. Table SOUND/HEADPHONES will
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
, a two
<
>
or
. A red bar will appear what means
Regulation of picture parameters
select the line PICTURE.
>
. The table PICTURE will appear on the
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
,
select the line with desired picture
>
set desired value for adjustable parameter.
<
select the line TINT. Using RC button
select the line NOISE REDUCION. Using RC
<
select the line MODE. Using RC button
27
SOUND
VOLUME
20
BALANCE
00
SOUND AV
STEREO
EFFECT
OFF
AVL
STANDARD
LANGUAGE
LANGUAGE1
STORE
EQUALIZER
HEADPHONES
SOUND / EQUALIZER
MODE
PERSONAL
EQUALIZER
00
100 Hz
+31
330 Hz
+23
1000 Hz
+15
3300 Hz
+25
6600 Hz
+31
STORE
SOUND/HEADPHONES
VOLUME
31
BALANCE
00
BASS
+15
TREBLE
+20
SOUND LANGUAGE
LANGUAGE1
STORE
MENU
SOUND
PICTURE
VIEW
CLOCK
AUTOSEARCH
MANUAL SEARCH
EDIT
OPTIONS
PROGRAM TUNE
or
PICTURE
MODE
PERSONAL
BRIGHTNESS
20
CONTRAST
40
SATURATION
32
SHARPNESS
20
HUE
00
or
TINT
NORMAL
NOISE REDUCION
OFF
STORE
Werbung
Kapitel
Inhaltsverzeichnis
