Customizing Your Stored Programmes - Clatronic CTV 652 ST/VT Bedienungsanleitung

If you know the TV channel frequency, you can enter it directly by using RC buttons 0, 1, ..., 9.
It is necessary to write this programme in to the memory.
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
6. Using RC buttons select the line STORE and push RC button
the screen, which shows that the programme is written into the memory.
7. If you want to tune up more programmes, using RC buttons
repeat this procedure, like is written in the 3-6 steps, until you will tune up all programmes which you
want.
8. If you want to leave the MENU tables, push the RC button OK twice.

Customizing your stored programmes

You can give the names for the programmes (NAME), to mask the programmes (HIDE), to change the
succession of tuned up programmes (CHANGE), also to delete unwanted programmes (DELETE).
1. Push the RC button OK and keep it about 2 seconds, until the MENU
table will appear on the screen.
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
2. Using RC buttons select the line EDIT and push RC button
>
or . The table EDIT will appear on the screen.
< >
3. Using RC buttons , , 0, 1, ..., 9 select the programme, which you
want to edit.
Name's conferment
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
4. Using RC buttons select the line NAME. Using RC button
>
select the symbol position of name, which you want to install, and
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
using RC buttons select one of symbols A-Z, 0-9, ., /, +, -, space.
The name can have up to five symbols.
When you have selected the name's symbol, using RC button
<
button go to the former position. Push the RC button OK, when you finish selecting the name.
The mask of programmes.
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
5. Using RC buttons select the line HIDE. Using RC button
the mask of concrete programme. If you choose ON, your television will skip selected programme,
switching the programmes using RC buttons
RC buttons 0, 1, ..., 9 or from the table VIEW.
The shift of programmes.
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
6. Using RC buttons select the line CHANGE and using RC button
< >
or activate the function of change.
< >
7. Using RC buttons or , select the position of programme into
which you want to transfer the turned on programme. Push the RC
button OK. You will see the strip and the new number of programme
in the screen. It shows that the programme is transferred.
The deletion of programmes.
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
8. Using RC buttons select the line DELETE and push RC button
< >
or . The turned on programme will be deleted and television will
switch to the next programme.
9. If you want to perform this procedure with other programmes, then
select the line PROGRAM by using RC buttons
3-8 items.
10. If you want to leave the MENU tables, push the RC button OK twice.
< >
or . You will see the strip in
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
select the line PROGRAM and
MENU
<
SOUND
PICTURE
VIEW
CLOCK
AUTOSEARCH
MANUAL SEARCH
<
or
EDIT
OPTIONS
PROGRAM TUNE
>
go to the next position or using RC
< >
or turn on (ON) or turn off (OFF)
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
. You will be able turn on this programme only using
EDIT
PROGRAM
NAME
HIDE
CHANGE
DELETE
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
and repeat procedure, like it is written in the
24
6. If you want that number of broadcasting programme would be shown constantly, select the ON by
using RC button
7. If you want that the number of broadcasting program would be shown just when you switch the
program, using RC button
Switching on.
8. Using RC buttons
9. If you want, that television at switching on after it was switched off by power button will turn into
the state it was before the switching off (to working mode – if it was turned off at the working mode,
or to the standby mode – if it was turned off at the standby mode), select the variant LAST STATE
by using RC button
10. If you want, that television after the disconnection always would turn into the standby mode, select
the variant STANDBY by using RC button
Signal source.
11. Using RC buttons
12. If the TV signal goes from the VCR, using RC button
variant VCR.
13. If the TV signal goes from the DVD, satellite tuner etc., select
variant TUNER by using RC button
Menu brightness.
14. Using RC buttons
15. Push RC button
the menu tables. The range of regulation is from 0 to 15.
The blue screen.
16. Using RC buttons
17. If you want that the screen would shine in blue then there is no signal push RC button
turn on this function (select ON).
18. If you want to see the noise then there is no signal, push RC button
(select OFF).
Child lock.
19. Using RC buttons
20. If you want to lock your television, push RC button
the ON. If you want to unlock your television, push RC button
the OFF.
21. If you want to leave the MENU tables, push the RC button OK twice.
1. Push the RC button OK and keep it about 2 seconds, until the
06
MENU table will appear on the screen.
− − − − −
2. Using RC buttons
3. Push RC button
OFF
4. Using RC buttons 0, 1, ..., 9 set the real time in the line CURRENT
TIME.
5. The TV can scan the real time from the programme, in which the
teletext is translating.
Using RC buttons
buttons 0, 1, ..., 9 set the number of teletext programme in the line
TIME FROM PROG. This enables automatically renew data of real time after the TV is switched on
in programme.
6. Using RC buttons
when the TV has to turn on from working mode to the standby mode.
7. Using RC buttons
the TV has to turn on from standby mode to the working mode.
< >
or .
< >
or select the variant OFF.
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
, select the line POWER ON.
< >
or .
< >
or .
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
select the line AV SOURCE.
<
or
< >
or .
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
select the line MENU BRIGHTNESS.
< >
or and set the desired graphic brightness of
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
select the line BLUE SCREEN.
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
select the line CHILD LOCK.
<
Setting the time for automatic switching on and off
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
select the line CLOCK.
< >
or . The table CLOCK will appear on the screen.
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
select the line TIME FROM PROG. Using RC
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
select the line TURN OFF TIME. Using RC buttons 0, 1, ..., 9 set the time,
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
,
select the line TURN ON TIME. Using RC buttons 0, 1, ..., 9 set the time, when
29
OPTIONS
>
LANGUAGE ENGLISH
select
PROGRAM NUMBER OFF
POWER ON LAST STATE
AV SOURCE VCR
MENU BRIGHTNESS 0...15
BLUE SCREEN ON
CHILD LOCK OFF
< >
or and
< >
or to turn off this function
>
or and turn on this function by selecting
< >
or and turn off this function by selecting
MENU
SOUND
PICTURE
VIEW
CLOCK
AUTOSEARCH
MANUAL SEARCH
EDIT
OPTIONS
PROGRAM TUNE