Automatic Update Of Programmes; Manual Tune Up Of Programmes - Clatronic CTV 652 ST/VT Bedienungsanleitung

Vorschau ausblenden

Seite von 26

/ 26
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

∧ ∧ ∧ ∧ ∧

∨ ∨ ∨ ∨ ∨

8. Using RC buttons

select the line PROGRAM. Using RC

buttons 0, 1, ..., 9 in the line PROGRAM set the number of

programme in which the TV has to switch automatically.

∧ ∧ ∧ ∧ ∧

∨ ∨ ∨ ∨ ∨

9. Using RC buttons

select the line SLEEP TIMER. Using RC

buttons

, you can set the time after which the television will turn

into the standby mode. The time interval is between 15 and 90 minutes.

If you want to turn off the timer, select the variant OFF.

10. If you want to leave the MENU tables, push the RC button OK twice.

Notes:

1. When you turn off your television using the power button, you have to enter the time meanings anew,

if there is no automatic scan of real time from the teletext.

2. If you turned off your television using the power button, you have to enter the fixed time of switching

off/switching on anew.

Push RC button AV one or few times to select the desired modes of external signal sources:

AV1 –

selects picture and sound inputs in the SCART1 socket. It is used to

connect VCR, satellite receiver or other equipment.

AV2 –

selects picture and sound inputs in the SCART2 socket. It is used to

connect the video, satellite receiver or other equipment.

RGB -

selects the inputs of red, green and blue color signals in the SCART1

socket. It is used to connect up the games or other signals.

S-VIDEO - selects the inputs of sound, picture's sharpness and colour signals in the

SCART2 socket. It is used to connect the video, satellite receiver or other

equipment.

FRONT AV- Is used to select the picture and tone input at the FRONT AV connections.

Is used for the connection of video recorder, satellite receiver or another

appliance.

Using teletext

1. Turn on the programme, which broadcasts the information of

teletext.

2. Push RC button TXT and turn on the teletext mode.

3. Using RC buttons 0, 1, ..., 9 select the desired page (3 numbers).

Your television will start to search the selected page of teletext.

After a while, you will see your selected page with teletext

information on the screen.

4. If some symbols are reproduced incorrectly in the teletext page,

it can be that wrong group of teletext languages is selected. Push

the RC button I/II and select the best-suited group: R/W, R/E, E/W, E/E, GRE.

5. If you want to come back to TV mode, push RC button TV or TXT.

Notes:

1. If there are no teletext in your chosen programme, you will see the note NO TELETEXT when you

switch the TV to the teletext mode.

2. The control of teletext information using other buttons is written in the chapter "Remote control".

CLOCK

CURRENT TIME

TIME FROM PROG.

TURN OFF TIME

TURN ON TIME

PROGRAM

SLEEP TIMER

AV modes

100 100 TV3

01/05 09:48:07

TELETEXT INFORMATION

09:51

If you want to add new programs to already written programs, you

can use the function of automatic renewal.

−−:−−

1. Push the RC button OK and keep it about 2 seconds, until the MENU

−−:−−

−−

table will appear on the screen.

2. Using RC buttons

OFF

button

. The table AUTOSEARCH will appear on the screen.

3. Select the line AUTOMATIC UPDATE by using RC buttons

and then push RC button

be tuned up automatically and will be written into the memory. It takes

few minutes. When the writing will be finished, the first written

program and table EDIT will appear on the screen. This function is

used to customizing the programmes. How to use this table, read in

the head "Customizing your stored programmes".

4. If you want to leave the MENU tables, push the RC button OK twice.

5. You can switch the programmes using the RC buttons

..., 9 or P+, P- on the front panel of TV.

1. Push the RC button OK and keep it about 2 seconds, until the MENU

table will appear in the screen.

2. Using RC buttons

RC button

screen.

3. Using RC buttons

into which you want to write tuned programme. If selected number

of programme is red, it shows, that the programme is written in the

selected position and will be deleted when you will write the new

programme.

4. Using RC buttons

to select desirable band of channels: VHF-L, VHF-H or UHF.

(VHF-L/L1, VHF-H/L (optional)).

5. Using RC buttons

want to start the search, push the RC button

the direction of search). When the programme is founded, the farther

tuning stops. If you want to find and tune up other programme, it is

necessary to push RC button

desirable programme will be found.