Possible Faults And Remedies, Error Messages - Konig + Neurath LIFE.S Serie Bedienungs- Und Montageanleitung

Possible faults and remedies
Drives not working
Possible cause
Power cord is not connected
Drives are not connected
Poor plug contact
Control unit is defective
Handswitch is defective
Drives only operating in one direction
Possible cause
Mains power breakdown or
mains power is plugged off
during movement
Control unit is defective
Handswitch is defective
Drive is defective
*) If movement is only possible downwards
Possible cause
Power cord is not connected
Handswitch is not connected
Control unit is defective
Power cord is defective
Handswitch is defective
Poor plug contact
Remedy
Plug the power cord into the control unit
Plug the motor cables into the control unit
Plug the motor cables, power cord and
handswitch in properly
Contact customer service
Replace the handswitch
Remedy
Manual reset *)
Contact customer service
Replace the handswitch
Contact customer service
Remedy
Plug the power cord into the
control unit
Plug in the handswitch
Contact customer service
Contact customer service
Replace the handswitch
Connect the plugs properly
33