Installation; Assemble The Speakers - Pioneer DCS-FS303K Bedienungsanleitung

16

Installation

3
Installation
Assemble the
speakers
3
For subwoofer:
Use the supplied adhesive to attach four
large pads to the base of subwoofer.
Assembling the speaker stands and securing
your front speakers
1. Insert the pole from the holes behind the
base and secure with the 4 screws.
(S-DV303FS)
2. Affix the gasket to the pole.
Affix the gasket to the surface of the pole
where the speaker will be mounted.
3. Insert the speaker cord from the hole
behind the base through to the pole and
connect it to the speaker terminal. After
connecting, put the speaker wire in the
gap on the back side of the speaker.
Match the colour tube on the wire with the
colour indicator on the label, then insert
the white wire with gray line into the red
(+) side and the other wire into the black (-)
side.