Fuel System Maintenance; Replacing The In-Line Fuel Filter - Toro TimeCutter ZS 4200S Bedienungsanleitung

Fuel System
Maintenance
DANGER
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you and others
and can damage property.
Refer to Fuel Safety (page 12)
list of fuel related precautions.
Replacing the In-Line Fuel
Filter
Service Interval: Every 100 hours or yearly,
whichever comes first—Check the
in-line fuel filter.
Every 200 hours/Every 2 years (whichever
comes first)—Replace the in-line fuel filter.
Never install a dirty filter after removing it from the
fuel line.
1. Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P
position.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Replace the filter
Note:
Ensure that the markings on the filter
follow the fuel flow direction.
for a complete
ARK
(Figure 46).
35
Figure 46
g027506
g033082