Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Adjustments
For the correct displaying of solar power bar graph it is
essenial to store the maximum measured solar power
EN
Entering setup menu:
u
Press
selecion "Back" (quits menu) is now highlighted. Each
further key-press on
is pressed for 10 seconds, the menu will be quit again.
Calibraing the maximum solar power: RESET 100 %.
Advice
i
Change the menu to the funcion "Reset 100 %". Keep
push-buton
end and "OK" is displayed. "Reset 100 %" completes the
calibraion and the last adjustment is permanently stored.
Alternaively, you can also wait 10 seconds to store and quit.
28
and hold for 5 seconds > Entering the menu. Menu
u
Important how to achieve the correct max solar
power:
Solar radiaion on the modules should be at their
maximum. At this ime the batery should NOT be
fully charged. In this case the solar regulator ope-
rates at reduced charge power and therefore solar
power can't be stored at its maximum.
u
pressed unil the progress bar reaches at the
BÜTTNER ELEKTRONIK – MT iQ Solar
allows scrolling the menu. If no key
Pro
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
