English - Kenwood Energysense JK450 Serie Handbuch

English

●
Congratulations on purchasing Make sure the kettle is switched off
your environmentally friendly kettle. before lifting or pouring.
●
'Energysense'™ kettle has been Remove the kettle from the base
carefully developed to help you save before filling or pouring.
●
energy and time by an improved Never put the kettle near or on
element technology combined with cooker hot plates or gas burners.
●
clear visibility and angled This kettle is for boiling water only.
●
graduations to help fill the correct This appliance is not intended for
amount of water under the tap from use by persons (including children)
as little as 1 cup measurements for with reduced physical, sensory or
small amounts. mental capabilities, or lack of
experience and knowledge, unless
Remember 'Fill a little save
they have been given supervision or
a lot'
instruction concerning use of the
before using your Kenwood
appliance by a person responsible
appliance
for their safety.
●
Read these instructions carefully and
●
Children should be supervised to
retain for future reference.
ensure that they do not play with the
●
Remove all packaging and any
appliance.
labels. Recycle where possible.
●
Only use the appliance for its intended
domestic use. Kenwood will not accept
safety
any liability if the appliance is subject to
improper use, or failure to comply with
●
Always use the filter and never
these instructions.
overfill - boiling water may splash
out.
before plugging in
●
Avoid contact with steam coming ●
Make sure your electricity supply is
out of the spout area when pouring
the same as the one shown on the
and out of the lid or spout area
underside of your kettle.
when refilling.
●
This appliance conforms to EC
●
Never let the cord hang down where
directive 2004/108/EC on
a child could grab it.
Electromagnetic Compatibility and
●
Always unplug your kettle
EC regulation no. 1935/2004 of
when not in use.
27/10/2004 on materials intended
●
Never put the kettle, powerbase,
for contact with food.
cord or plug in liquid.
before using for the first time
●
Never use a damaged appliance.
1 Adjust the length of the cord
Get it checked or repaired: see
turn the underside of the base
'service'
clockwise
●
Caution: Do not operate the kettle
anticlockwise
on an inclined surface.
cord.
●
Only use the powerbase supplied
2 Fill to 'MAX', boil, then pour the
and keep it clean and dry.
water away. Repeat 2 to 3 times.
●
Make sure the lid is secure before
switching the kettle on.
●
Warning: Do not open the lid while
the water is boiling.
●
Take care when opening the lid -
droplets of hot water may be
ejected.
2
-
to lengthen and
to shorten the