Werbung
Warnhinweise . Warnings . Recommandations . Avvertenze . Advertencias
Achtung:
Note:
– Mounting and commissioning is to be conducted by a qualified specialist under compliance with local safety regulations.
– The system must be disconnected from power!
– All mounting surfaces must be clean and free of burrs. The specified shaft tolerances must be complied with.
– The scale drum is to be fastened with all provided screws and washers.
– The screws must be tightened with the specified tightening torque according to the Mounting Instructions and secured against
unintentional loosening.
– The tightening torques of the mounting screws are only valid for mounting on steel!
The speed values specified for the scale drum apply only when the given warnings are observed.
Attention :
4
Werbung
