Maintenance And Cleaning; Lint Filter / Loading Door Inner Surface - Beko DPU 7306 XE Bedienungsanleitung

7

Maintenance and cleaning

Service life of the product extends and
frequently faced problems decrease if
cleaned at regular intervals.
CAUTION: Unplug the product
B
from the mains during any
maintenance and cleaning works
(control panel, body, etc.).
7.1 Lint Filter / Loading Door
Inner Surface
Lint and fiber released from the laundry to
the air during the drying cycle are collected in
the Lint Filter.
C
Such fiber and lint are generally
formed during wearing and
washing.
A
CAUTION: Always clean the lint
filter and the inner surfaces of
the loading door after each drying
process.
C
You can clean the lint filter
housing with a vacuum cleaner.
To clean the lint filter:
1. Open the loading door.
2. Remove the lint filter by pulling it up and
open the lint filter.
3. Clean lint, fiber, and cotton raveling by
hand or with a soft piece of cloth.
4. Close the lint filter and place it back into
its housing.
64 / EN
C
A layer can build up on the filter
pores that can cause clogging of
the filter after using the machine
for a while. Wash the lint filter
with warm water to remove the
layer that builds up on the lint
filter surface. Dry the lint filter
completely before reinstalling it.
C
Clean the entire inner surface of
the loading door and loading door
gasket.
Dryer / User Manual