Easy Use; Preparing The Machine; Programme Selection; Auxiliary Functions - Beko DPU 7306 XE Bedienungsanleitung

6

Easy use

6.1 Preparing the machine

1. Plug in the machine.
2. Place the laundry into the machine.
3. Press On / Off button.

6.2 Programme selection

1. Decide the appropriate programme from
the table including drying levels.
2. Select the desired programme using
Programme Selection knob.

6.3 Auxiliary functions

Machine will give an audio warning when the
programme is completed. If you do not want
the machine to give an audio warning, press
the Volume button repeatedly until an "x"
sign appears on the display. Use the same
button to adjust the volume.
Used to adjust the required dryness level.
More drying is performed compared to
default settings when "+" sign appears
and less drying is performed when "-" sign
appears. Programme duration can vary
depending on selection.
You can use Anti-creasing function to
prevent laundry from creasing if you will not
immediately take the laundry out after the
program has come to an end. This function
rotates the laundry every 240 seconds for 2
hours to prevent creasing.
In the first display image below, anti-creasing
is activated but programme is still running.
Drying cycle is completed and Anti-creasing
step has started in the second display image.

6.4 Starting programme

Press Start / Pause / Cancel button to
start the programme.
Start / Pause symbol will light up to indicate
that the programme has started and ":"
symbol in the middle of remaining time will
continue flashing.

6.5 End of programme

Lint Filter Cleaning and Water Tank warning
symbols light up in the programme follow-
up indicator and "End" label appears on the
display when the programme comes to an
end. Loading door can be opened and the
machine becomes ready for a second cycle.
Press On / Off button to switch the machine
off.
Dryer / User Manual

6.6 Cancelling the programme

If you want to stop drying and cancel the
programme for any reason after the machine
has started, press and hold the Start /
Pause / Cancel button for 3 seconds. Lint
Filter Cleaning and Water Tank warning
symbols light up and "End" label appears on
the display as a reminder at the end of this
period.

6.7 Child-proof Lock

Machine is equipped with a Child-proof Lock
which prevents interfering with the current
programme flow by pressing any button. All
buttons except the On / Off button on the
control panel are disabled when the Child-
proof Lock is active.
To activate the childproof lock:
Press Audio Warning and Anti-Creasing
buttons simultaneously for 3 seconds.
To start a new programme after the current
programme is over or to interrupt the current
programme, Child-proof Lock should be
deactivated. To deactivate the childproof
lock:
Press Audio Warning and Anti-Creasing
buttons simultaneously for 3 seconds.
C
Lock symbol will appear on the
display when Child-proof Lock is
activated.
C
Child-proof lock is deactivated
when the machine is switched off
and on with On / Off button.
When the Child-proof Lock is
activated:
Display symbols will not change even if the
position of programme selection knob is
changed while the machine is running or
in halt.
If the child-proof lock is deactivated after
changing the position of programme
selection knob while your machine is
running, your machine stops and new
programme information is displayed.
63 / EN