Changing The Programme After It Has Started - Beko DPU 7306 XE Bedienungsanleitung

perating the product
O
When the Child-proof Lock is
activated:
• Display symbols will not change even
if the position of programme selection
knob is changed while the machine is
running or in halt.
• If the child-proof lock is deactivated after
changing the position of programme
selection knob while your machine is
running, your machine stops and new
programme information is displayed.
5.15 Changing the programme
after it has started
After the machine starts, you can change the
selected programme and dry your laundry in
a different programme.
1. If you want to select the Extra Dry
programme instead of Iron Dry
programme, press and hold the Start /
Pause / Cancel button for 3 seconds to
cancel the programme.
2. Select Extra Dry programme by turning
the Programme Selection knob.
3. Press Start / Pause / Cancel button to
start the programme.
C
You can also select a new
programme by turning the
Programme Selection knob
while the machine is operating.
In this case, currently running
programme is aborted and new
programme information appears
on the display.
Dryer / User Manual
Adding / removing laundry in Pause
mode
In order to add or take out laundry after the
drying programme has started:
1. Press Start / Pause / Cancel button
to switch the machine to Pause mode.
Drying process will stop.
2. While in Pause mode, open the loading
door, add or take out laundry and close
the loading door.
3. Press Start / Pause / Cancel button to
start the programme.
C
Any laundry added after drying
process has started may cause
the clothes that are already dried
in the machine intermingle with
wet clothes and the result might
be wet laundry at the end of the
process.
C
You may repeat laundry adding
or removing as many times as
you desire during drying the
laundry. However, this process
will increase the programme
time and energy consumption
since the drying process will be
interrupted repeatedly. Therefore,
it is recommended to add laundry
before the drying programme
starts.
C
If you select a new programme by
turning the Programme Selection
knob while your machine is
in Pause mode, then current
program will be aborted and new
programme information will be
displayed.
CAUTION: Do not touch the
inner surface of the drum when
adding or taking out laundry while
a programme is running. Surfaces
of the drum are hot.
61 / EN