3M PELTOR WorkTunes Pro HRXS220A Bedienungsanleitung Seite 5

GZX$An
3M™ PELTOR™ WorkTunes™ Pro FM Radio Headset HRXS220A, HRX220P3E
3M™ PELTOR™ WorkTunes™ Pro AM/FM Radio Headset HRXS221A-NA, HRXS221P3E-NA, HRXS221A,
HRXS221P3E
Introduction
Congratulations and thank you for choosing 3M™ PELTOR™ Communication Solutions! Welcome to the next
generation of protective communication.
Safety Information
Please read, understand, and follow all safety information contained in these instructions prior to the use of this
device. Retain these instructions for future reference.
Intended use
These 3M™ PELTOR™ WorkTunes™ Pro headsets are intended to provide protection against hazardous noise
levels and loud sounds while allowing the user to listen to the radio or other audio devices. It is expected that all
users read and understand the provided user instructions as well as be familiar with the use of this device.
Explanation of Signal Word Consequences
WARNING:
Indicates a hazardous situation which, if not avoided, could result in serious injury or death
CAUTION:
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury and/or property damage.
NOTICE:
Indicates a situation which, if not avoided, could result in property damage.
^ WARNING
• If the information and recommendations contained herein are not adhered to, the protection afforded by the
earmuffs will be severely impaired.
• This hearing protector helps reduce exposure to hazardous noise and other loud sounds. Misuse or failure to
wear hearing protection at all times when exposed to hazardous noise may result in hearing loss or
injury. For proper use, see supervisor, user instructions, or contact 3M Technical Support.
• Earmuffs, and in particular cushions, may deteriorate with use and should be examined at frequent intervals for
cracking and leakage, for example.
When used regularly, 3M recommends replacing the foam liners and cushions at least twice a year to maintain
consistent attenuation, hygiene, and comfort. If a cushion is damaged, it should be replaced. The cushions and
foam liners may deteriorate with use and should be examined at regular intervals for cracking or other
damage.
• Ensure the hearing protector is fitted, adjusted, regularly checked for serviceability, and maintained in
accordance with these user instructions. Improper fit of this device will reduce its effectiveness in
attenuating noise. Consult the enclosed instructions for proper fit.
• Hearing protectors must be worn at all times in noisy surroundings for proper protection.
• The audibility of warning signals at a specific workplace may be impaired while using the entertainment facility.
• The fitting of hygiene covers to the cushions may affect the acoustic performance of the earmuffs.
• The noise reduction may be lower when eyeglasses, goggles or respirator straps are worn between the
sealing surface of the earmuff cushions and the sides of the wearer's head. For best noise reduction, select
eyeglasses or goggles that have thin, flat temples or straps which will minimize interference with the seal of the
earmuff cushions. Pull long hair back to the extent possible and remove other items that may degrade the
earmuff seal such as pencils, hats, jewelry or earbuds. Do not bend and reshape the headband as this will
cause a loose fit and allow sound leakage.
• The helmet mounted earmuffs are of large size range. Earmuffs complying with EN 352-3 are of medium size
range or small size range or large size range. Medium size range earmuffs will fit the majority of wearers.
Small size range or large size range earmuffs are designed to fit wearers for whom medium size range
earmuffs are not suitable.
4