Receiving RDS broadcasts (FM only)
Press the BAND/RDS button and set
the FM AUTO.
Press the BAND button on the
1
remote control unit and set the FM
AUTO.
Press the BAND/RDS button for at
least 3 seconds.
Press the RDS button on the remote
2
control unit.
Flashes
Press the PRESET/TUNING
UP or DOWN button.
Press the TUNING
•
or
ª
3
button on the remote control
unit.
Flashes
The station is tuned in.
Station name
4
"RDS" lights after 5 seconds of flashing.
Once the station is tuned in, "RDS" flashes for
5 seconds and program service name is
displayed.
NOTE: • If no RDS station is found, " NO PROG " is
displayed.
Downloaded from
www.Manualslib.com
PTY Search
Press the BAND/RDS button for at
BAND
/ RDS
least 3 seconds. Then press the
BAND/RDS button once.
Press the RDS button twice on the
BAND
remote control unit.
5
Flashes
("PTY" and "RDS" flash, and ", PTY /" is
BAND
/ RDS
displayed.)
Press the MEMORY/SET button
RDS
to select the type of program.
Press the PRESET < or >
button on the remote control
unit to select the type of
program.
6
(One of the 29 types listed
below can be selected.)
PRESET / TUNING
DOWN
UP
Flashes
TUNING
Press the PRESET/TUNING
UP or DOWN button.
7
Press the TUNING
button on the remote control
unit.
The station is tuned in.
Station name
8
"PTY" and "RDS" light after 5 seconds of flashing.
Once the station is tuned in, "RDS" and "PTY"
flash for 5 seconds and the program service
name is displayed.
NOTE: I f n o p r o g r a m o f t h e s p e c i f i e d t y p e i s
found," NO PROG " is displayed.
manuals search engine
Programs
BAND
/ RDS
RDS
MEMORY
/ SET
TP Search
PRESET
Press the BAND/RDS button for at
+
least 3 seconds.
The press the BAND/RDS button
-
twice.
Press the RDS button 3 times on
9
the remote control unit.
PRESET / TUNING
Flashes
DOWN
UP
Press the PRESET/TUNING
UP or DOWN button.
TUNING
or
•
ª
Press the TUNING
10
button on the remote
control unit.
Flashes
The station is tuned in.
11
"TP" and "RDS" light after 5 seconds of flashing.
Once the station is tuned in, "TP" and "RDS"
light and program service name is displayed.
NOTE: " NO PROG " is displayed when there is
traffic information broadcast station.
(News)
(Weather & Meteorological)
(Affairs)
(Finance)
(Information)
(Children's Progs)
(Sport)
(Social Affairs)
(Education)
(Religion)
(Drama)
(Phone In)
(Culture)
(Travel & Touring)
(Science)
(Leisure & Hobby)
(Varied)
(Jazz Music)
(Pop Music)
(Country Music)
(Rock Music)
(National Music)
(Easy Listening)
(Oldies Music)
(Light Classics)
(Folk Music)
(Serious Classics)
(Documentary)
(Other Music)
RT (Radio Text)
(This operation is only possible from the remote
BAND
control unit RC-906)
/ RDS
To turn the RT mode on, press the
PANEL button on the remote control
RDS
unit until the RT indicator is lit. (Refer
to page 11.)
When the station currently tuned in is
offering a radio text message service,
12
the message scrolls on the display.
PRESET / TUNING
DOWN
UP
• When the RT mode is turned on while an RDS radio
station not offering an RT service is tuned in, " NO
T E X T " flashes on the display, then the mode
TUNING
or
•
ª
automatically switches to the PS mode.
• In the same way, the mode automatically switches to
the PS mode when the RT service is finished. In this
case, the mode automatically switches from the PS
mode back to the RT mode when an RT broadcast is
resumed.
• The RT mode cannot be set in the AM band or FM
stations not offering RDS broadcasts.
• To turn the RT mode off, press the PANEL button and
switch to the desired display mode.
NOTE:
The PANEL function can only be operated with the
remote control unit (RC-906).
ENGLISH
TIME/
PANEL
15