Inhaltsverzeichnis
Werbung
OpTIONAL SIDE-fORCE GENERATOR INSTALLATION
1
Temporarily hold the side force generator in place so that it is in the groove
and squared.
86
Downloaded from
www.Manualslib.com
2
Using a felt-pen mark the mounting hole locations onto the wing tip.
manuals search engine
3
Using a 1/16-inch drill bit and high speed drill or rotary tool make pilot holes.
It is very important to use a high speed rotary tool and increase the drill bit
size with 1/16-inch at a time to finally get to 1/4-inch drill bit.
Werbung
Inhaltsverzeichnis
