Inhaltsverzeichnis
Werbung
landing gear & Wheel pants installation • • • •
7
Hold the locknut with a #10 wrench and using a 4.5mm hex tip, run the bolt
through the locknut. Tighten enough to allow for the wheel to rotate with little
friction.
Downloaded from
www.Manualslib.com
8
Slightly open up the wheel pant and insert the wheel in the wheel pant.
manuals search engine
9
Pass the bolt through the wheel pant, the landing gear leg and a washer and
then locknut. Using a vise-grip, hold the head of the bolt and with the help of
a #10 socket wrench tighten the locknut..
29
Werbung
Inhaltsverzeichnis
