Inhaltsverzeichnis
Werbung
aileron serVo installation and hinge line sealing•
16
Install the ball link on the control horn using crescent wrench and 2.5mm
ball driver
26
Downloaded from
www.Manualslib.com
17
Install the ball link on the servo arm using a crescent wrench and 3/32-inch
ball driver
manuals search engine
18
Adjust the servo travel using a computerized transmitter or a JR
MatchBox™so that there is no binding throughout the travel of the aileron.
Werbung
Inhaltsverzeichnis
