Inhaltsverzeichnis
Werbung
throttle serVo installation • • •
16
Temporarily attach an 1-inch servo arm to servo and line up the arm with the
throttle rod by moving the throttle tray. Using a felt pen mark the tray location.
Using pin vise mark the mounting locations.
54
Downloaded from
www.Manualslib.com
17
Drill the dome for servo tray mounting locations using 3/32-inch and 7/64-
inch drill bits.
manuals search engine
18
Temporarily mount the servo tray and connect the throttle servo arm to the
servo.
Werbung
Inhaltsverzeichnis
