Power Connector - DFI NS35-TC Benutzerhandbuch

Downloaded from www.Manualslib.com
1
Quick Setup Guide
The DIMM Standby Power LED will turn red when the system's power is
on or when it is in the Suspend state (Power On Suspend or Suspend to
RAM). It will not light when the system is in the Soft-Off state.
The PCI Standby Power LED will turn red when the system is in the
power-on, Soft-Off or Suspend (Power On Suspend or Suspend to RAM)
state.
Lighted LEDs serve as a reminder that you must power-off the system
then turn off the power supply's switch or unplug the power cord prior to
installing any memory modules or add-in cards.

1.3.15 Power Connector

3 4
3 4
1 2 1 2
+12V power
(ATXP1)
ATX Main Power
1 1 3.3V
1 3.3V
1 2 -12V
2 3.3V
1 3 Ground
3 Ground
1 4 PS-ON
4 +5V
1 5 Ground
5 Ground
1 6 Ground
6 +5V
1 7 Ground
7 Ground
1 8 -5V
8 PW-OK
1 9 +5V
9 5VSB
2 0 +5V
1 0 +12V
18
manuals search engine
10 20
ATX Power
(J8)
1 11
+12V Power
1 Ground
2 Ground
3 +12V
4 +12V