Starting Your Notebook; Power On - Gericom SUPERSONIC KN1-Serie Bedienungsanleitung

Starting Your Notebook

POWER ON

Suspend/Resume/Power On Button
The suspend/resume/power on switch is used to turn on your notebook from its off state. Once
you have connected your AC adapter or charged the internal Lithium ion battery, you can power
on your notebook by pressing the suspend/resume/on button located above the keyboard. If you
need to take an extended break, press the button again to turn it off.
CAUTION
When you power on your notebook, it will perform a Power On Self Test (POST) to check the
internal parts and configuration for correct functionality. If a fault is found, your computer emits
an audio warning and or displays and error message.
Depending on the nature of the problem, you may be able to continue by starting the operating
system or by entering the BIOS setup utility and revising the settings.
After satisfactory completion of the Power On Self Test (POST), your notebook loads the
installed operating system.
CAUTION
Downloaded from www.Manualslib.com
Do not carry your notebook around with the power on or subject it to shocks or
vibration, as you risk damaging the hard disk.
Never turn off your notebook during the Power On Self Test (POST), or an
unrecoverable error may occur.
manuals search engine
GETTING STARTED
15