Code Programmierung
D
1. Klicken Sie mit einem Doppelklick der Maus auf das Kommando
"programming code".
2. Danach schalten Sie bitte das Autoradio ein.
Nach dem Einschalten bestätigen Sie bitte mit "OK".
3. Es erscheint das Fenster "Enter Code".
4. Bitte geben Sie nun den 4-stelligen Mastercode ein (z.B. 1234)
und bestätiben bitte mit "OK".
5. Im Ausgabefenster sollte "Code Programming = OK".
Downloaded from
www.Manualslib.com
manuals search engine
Programming the code
GB
1. Double-click the command "programming code".
2. Switch on the set.
After you have switch on the set, press "OK" to confirm.
3. The dialog box "Enter Code" appears.
4. Enter the 4 digit master code (e.g.1234) and press "OK" to
confirm.
5. The following information should now appear in the Comservers
window: ""Code Programming = OK".
- 21 -