Important Safety Instructions - Viper FANG 18C Kurzanleitung

This document
This document contains the safety information relevant
for the appliance along with a quick reference guide.
Prior to using the appliance for the first
time, be sure to read this document
through and keep it ready to hand.
Further support
Detailed information on the appliance can be found in
the operating instructions, which you can download
from our web site at www.vipercleaning.eu.
For further queries, please contact the VIPER service
representative responsible for your country. See re-
verse of this document.

Important safety instructions

Electrical components
Electric shock due to faulty mains connecting lead.
Touching a faulty mains connecting lead can result in
serious or even fatal injuries.
Do not damage the mains power lead (e.g. by driv-

ing over it, pulling or crushing it).
Regularly check whether the power cord is dam-

aged or shows signs of ageing.
Have the faulty mains connecting lead replaced by

your VIPER service representative or a qualified
electrician prior to using the appliance again.
Damage due to unsuitable mains voltage.
The appliance can be damaged as a result of being
connected to an unsuitable mains voltage.
Ensure that the voltage shown on the rating plate

corresponds to the voltage of the local mains power
supply.
Symbols used to mark instructions
Danger that leads directly to serious or irreversible in-
juries, or even death.
Danger that can lead to serious injuries or even death.
Danger that can lead to minor injuries and damage.
The appliance must
• only be used by persons, who have been instructed
in its correct usage and explicitly commissioned with
the task of operating it
FANG 18 C
Downloaded from www.Manualslib.com
DANGER
CAUTION
DANGER
WARNING
CAUTION
manuals search engine
• only be operated under supervision
• not be used by children
Do not use any unsafe work techniques.

Switch off the appliance and disconnect the mains

plug in the following situations:
- Prior to cleaning and servicing
- Prior to replacing components
- Prior to changing over the appliance
Besides the operating instructions and the binding ac-
cident prevention regulations valid in the country of
use, observe recognised regulations for safety and
proper use.
Purpose and intended use
All automatic cleaning machines are exclusively in-
tended for the wet cleaning of water-resistant floor
coverings in building interiors.
Any use going beyond that is deemed not to be in line
with the intended purpose. The manufacturer does not
accept any liability for any resultant damage; the risk in
such cases is borne by the user only.
The cleaners are suitable for commercial use, e.g. in
hotels, schools, hospitals, etc.
Use for the intended purpose also includes adherence
to the operating, servicing and maintenance instruc-
tions prescribed by the manufacturer.
Changes made to the automatic machines by the us-
ers themselves rule out the liability of the manufacturer
for any resultant damage.
Floor coverings are to be checked with regard to the
suitability of this cleaning method before the use of the
machine!
Note the surface pressure in the case of point-elastic
floors, e.g. in gymnasiums!
The manufacturer accepts no liability for damage to the
machine and the floor covering to be cleaned which is
caused by the use of the wrong brushes and cleaning
agents.
Storage
Store the appliance in a dry place, protected from

frost.
Electrical connection
Connected the appliance via a residual current cir-

cuit breaker.
Arrange the electrical parts (sockets, plugs and

couplings) and lay down the extension lead so that
the protection class is maintained.
Connectors and couplings of power supply cords

and extension leads must be watertight.
ENGLISH
7