ASROCK X99 Extreme6 Handbuch Seite 31

2.9 M.2_SSD (NGFF) Module Installation Guide
he M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. he Ultra M.2
Socket (M2) can accommodate either a M.2 SATA3 6.0 Gb/s module or a M.2 PCI Express
module up to Gen3 x4 (32 Gb/s). Please be noted that the Ultra M.2 Socket (M2) is shared
with the SSATA3_2 connector; you can only choose either the Ultra M.2 Socket (M2) or
the SSATA3_2 connector to use.
* If M.2 PCI Express module is installed, PCIE5 will be disabled.
Installing the M.2_SSD (NGFF) Module
E
Nut Location
PCB Length
Module Type
Downloaded from www.Manualslib.com
5
4
D C B A
No. 1
A
3cm
Type2230
manuals search engine
Step 1
Prepare a M.2_SSD (NGFF) module
and the screw.
Step 2
Depending on the PCB type and
3
length of your M.2_SSD (NGFF)
module, ind the corresponding nut
location to be used.
2
1
2 3
B C
4.2cm 6cm
Type 2242 Type2260
X99 Extreme6
4 5
D E
8cm 11cm
Type 2280 Type 22110
29