Solving Problems; General; Troubleshooting Table; Ceramic Hob - Pelgrim PF8221RVS Anleitung

SOLVING PROBLEMS

General

Troubleshooting table

Ceramic hob

Oven

If you notice a crack in the glass top (however small), switch the hob
off immediately, unplug the hob, turn off the (automatic) fuse switch(es)
in the meter cupboard or, in the event of a permanent connection,
set the switch in the power supply lead to zero.) Contact the service
department.
If the appliance does not work properly, this does not always mean that
it is defective. Try to deal with the problem yourself first by checking the
points mentioned below.
Fault
Cooking zones do
not get hot.
The food is not cooked
• Check whether the timer has been set and you have pressed the
'start button'.
• Close the door properly.
• Check whether a fuse has blown and whether a circuit breaker has
been activated.
Food is overcooked or undercooked
• Check whether the correct cooking time has been set.
• Check whether the temperature has been set.
The display will be reset following power failure
• Remove the plug from the socket and put it back in again.
• Set the time again.
Cause
– Appliance incorrectly
connected.
– Plug not, or not
completely, in the
socket.
– Fuse(s) in the meter
cupboard defective.
Solution
– See the
installation instruc-
tions for correct
connection.
– Put the plug into the
socket
– Check the fuses in
the meter cupboard.
EN 31