Ir Delete Function; Ir Deleting Function - Spectral BRA2 Bedienungsanleitung

Note: The red "ON/Standby" key on the sound system remote control has a dual function. Press it once and the display will show ON , which allows the switching on function
to be programmed. If the red "On/Standby" key on the sound system remote control is pressed twice in quick succession the display will show STB and the Standby or
switching off function can be programmed. If your TV remote control has only one key for the "ON" and "OFF" functions both the "ON" and "Standby" functions must still be
allocated with this command.
Note: Due to the variety of infrared codes it is not possible to guarantee that every remote control operation of the sound system can be learned.

IR delete function

To delete the TV remote control commands learned by the sound system you need to follow these steps:
1 Switch the sound system on
2 Press the "ON/Standby" key on the Sound system remote control for approx. 5 seconds.
3 The display will flash IRL
4 Press the "Mute" key of the Sound system remote control for approx. 5 seconds.
5 The display will show CLR for approx. 5 seconds. The Sound system
will then switch automatically back to normal operation.
57
Downloaded from www.Manualslib.com manuals search engine