Ir Learning Function - Spectral BRA2 Bedienungsanleitung

IR learning function

The sound system can learn the infrared code of your TV remote control and therefore allows you to control the functions of the sound system and TV device via your remote
control. You can allocate the instructions for the sound system to any key of the TV remote control. When choosing a key make sure that the instructions for the sound system
do not conflict with the TV device. We recommend that you deactivate the internal loudspeaker of the TV device once the sound system is connected.
1 Hold the TV remote control in position.
2 Switch the sound system on
3 Press and hold the « On/Standby » key of the sound system remote
control for approx. 5 seconds.
4 The display shows a flashing IRL
5 Press the chosen function on the Spectral
remote control e.g. « Volume + ».
6 Now the display shows a flashing
7 Within 20 seconds press the key you wish to allocate to this function on
the TV remote control.
8 Once this has been successfully allocated the display will show
and you can continue with the programming of the next key function,
e.g. « Volume – ».
9 If the display shows FAI this means the allocation has failed and you
should repeat steps 5 to 8.
56
Downloaded from www.Manualslib.com
V+
OK
manuals search engine
ON
ON MUTE
STANDBY
STANDBY
Exit menu: „Press and hold the « On/Standby »
key again for longer than 5 seconds to exit the
"IR learning function » menu. " If the sound system
does not receive any input instructions from the
remote control within a period of 60 seconds
the menu navigation returns to normal mode
automatically.
Remote control