Unpacking; Installation; Breaking In; Setting Up The Remote Control - Spectral BRA2 Bedienungsanleitung

Unpacking

Unpack the box carefully and check that all the following parts are
present:
• Spectral Soundsystem
BRA2: 1x active speaker module
VRA2: 1x active speaker module (Right/Active),
1x passive speaker module (Left/Passive)
• 1x remote control incl. battery
• 1x Mains cable
• 2x HDMI® cable
• 1x digital optical cable
• 1x digital coaxial cable
• 1x analog cable (jack-RCA)
• Only VRA2: 1 set of speaker cable for connection between the

Installation

The sound system should be centrally located below the TV.
Capacity up to 40 kg. The sound system is intended for installation
with your Spectral furniture. The sound system is inserted into the
furniture unit or sound base. For exact position, please refer to the
assembly instructions for your furniture. The loudspeaker covers
are then attached.
40
Downloaded from www.Manualslib.com
loudspeaker modules
manuals search engine

Breaking in

Maximum sound quality requires a breaking-in time
of 15 - 20 operating hours.
• During this time operate the loudspeaker at normal volume
• Avoid high noise levels
• Listen to a variety of music
Setting up the
remote control
The included battery is already
inserted in the remote control.
For starting up remove the protec-
tion film. Be careful to ensure that
a spare battery is installed correctly
according to the polarity markings
(+/-). Only use the type of batteries
specified for use with this system
(CR 2032).
Note
The supplied battery is provided
for the trial run and can have a
shorter life span.
AUF ZU
CR 2032
Remote control