Eco Standby (Eco) - Spectral BRA2 Bedienungsanleitung

ECO Stand By (ECO)
If this function is enabled (ON), the device automatically goes into ECO standby if it detects no signal on the selected input for one hour.
If this function is disabled (OFF), the sound system must be manually switched off. This function is enabled (ON) as standard.
To enable/disable this function, follow these steps:
1 With the device powered on, press and hold the „Play Mode" button for more than 3 seconds until AUT appears in the display.
2 Press the „Play Mode" again briefly until ECO appears in the display.
3 Press the „Volume +" button to enable the function (ON).
4 Press the „Volume -" button to disable the function (OFF).
5 Exit the menu by again pressing and holding the „Play Mode" button for more than 3 seconds. If no input is made within 10 seconds, the unit will automatically exit the
configuration menu.
Note: This function is automatically disabled when the AUT or CEC function is enabled.
52
Downloaded from www.Manualslib.com manuals search engine