Flowserve Durco MARK 3 ISO MAG CBMM Betriebsanleitung Seite 74

Flowserve factory contacts:
Flowserve SIHI Belgien bvba
Zone Gosset - 't Hofveld 1
1702 Groot-Bijgaarden - Belgien
+32 2 481 77 11
lokalen Flowserve Vertreter
Um Ihren
Sales Support Locator System auf www.flowserve.com
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When
properly selected, this Flowserve product is designed to perform its intended function safely during its useful life.
However, the purchaser or user of Flowserve products should be aware that Flowserve product might be used
in numerous application under a wide variety of industrial service conditions. Although Flowserve can (and
often does) provide general guidelines, it cannot provide specific data and warnings for all possible
applications. The purchaser/user should read and understand the User Instructions: Installation Operation
Maintenance included with the product, and train its employees and contractors in the safe use of Flowserve
products in connection with its application
While the information and specifications contained in this literature are believed to be accurate, they are
supplied for informative purpose only and should not be considered certified or as a guaranteed of satisfactory
results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express
or implied, regarding any matter with respect to the product. Because Flowserve is continually improving and
upgrading its product design, the specifications, dimensions and information contained herein are subject to
change without notice. Should any question arise concerning these provisions, the purchaser/user should
contact Flowserve Corporation at any one of its worldwide operations or offices.
© 2020 Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation
CBMM/CBME Betriebsanleitung – OIM_ISOMAG – DE – 00
zu finden, verwenden Sie bitte das
FLOWSERVE REGIONAL SALES OFFICES:
USA und Kanada
Flowserve Corporation
5215 North O'Connor Blvd.
Suite 2300
Irving, Texas 75039-5421, USA
Telefon: +1 937 890 5839
Europa, Naher Osten, Afrika
Flowserve Corporation
Parallelweg 13
4878 AH Etten-Leur
Niederlande
Telefon: +31 76 502 8100
Lateinamerika
Flowserve Corporation
Martín Rodriguez 4460
B1644CGN-Victoria-San Fernando
Buenos Aires, Argentinien
Telefon: +54 11 4006 8700
Telefax: +54 11 4714 1610
Asien-Pazifik
Flowserve Pte. Ltd.
10 Tuas Loop
Singapur 637345
Telefon: +65 6771 0600
Telefax: +65 6862 2329