Key To Symbols; Approval; Worn-Out Products - Sundstrom SR 500 Gebrauchsanleitung

STD HD Filter
•
P3 R (PAPR-P3) 175 l/min
•
P3 R (PAPR-P3) 175 l/min
•
P3 R (PAPR-P3) 240 l/min
•
A1BE2K1P3 R
(PAPR-A1BE2K1-P3)
•
A1BE2K1P3 R
(PAPR-A1BE2K1-P3)
•
A1BE2K1P3 R
(PAPR-A1BE2K1-P3)
Pressure and temperature range
• Storage temperature. Fig. 3.
• Service conditions. Fig. 4.
Shelf life
The equipment has a shelf life of 5 years from the date of
manufacture. However, note that the battery must be
charged at least once a year.

6. Key to symbols

Recycling symbol
See user instructions
Not with ordinary waste
CE approved by
INSPEC International Limited
Insulation class 2
Pressure and temperature compensated
Relative humidity
<XX% RH
+XX°C
Temperature range
-XX°C
Air flow rate Expected
operating
7 h
12 h
7 h
175 l/min 4 h
175 l/min 7.5 h
240 l/min 4 h

7. Approval

• The SR 500 in combination with face shield SR 540 or
SR 570, welding shield SR 590 or SR 592, helmet
with visor SR 580, helmet with visor SR 580 with wel-
ding shield SR 584, hoods SR 520, SR 530, SR 561
or SR 562 is approved in accordance with EN 12941,
class TH3.
• The SR 500 in combination with full face mask
SR 200, SR 200 Airline or half mask SR 900 is appro-
ved in accor dance with EN 12942, class TM3.
• The SR 500 conforms to the requirements of
EN 61000-6-3 Emission and EN 61000-6-2 Immuni-
ty, which makes the fan conform to EMC Directive
2004/108/EC.
• The electronics ingress protection is approved in IP
classification IP67 in accordance with IEC/EN 60529.
The PPE Regulation (EU) 2016/425 type approval has
been issued by Notified Body 0194. For the address, see
the reverse side of the user instructions.
The EU declaration of conformity is available at
www.srsafety.com
Australian StandardsMark
The fan SR 500 is tested and certified to comply to
AS/NZS 1716:2012. The StandardsMark is issued
under licence by SAI Global Certification Services Pty
Limited Lic No.766 (ACN 108 716 669) ("SAI Global").

8. Worn-out products

The fan unit contains a circuit board with electronic
components, a small proportion of which comprise toxic
substances. The battery contains no mercury, cadmium
or lead, and is therefore not regarded as environmentally
harmful waste. The plastic parts are marked with the
material code. For proper handling, collection and recy-
cling, worn-out fans should be handed in to a recycling
centre. Contact the local authorities for information on
the location of your nearest recycling centre.
Recycle in accordance with local regulations. Proper re-
cycling of the product contributes to efficient use of the
natural resources.
39