Accessories / Spare Parts; Delivery Check; Use - Sundstrom SR 500 Gebrauchsanleitung

Limitations
• The SR 500 must always be used with two particle fil-
ters or two combined filters or a combination of two
gas filters of the same type and two particle filters.
• If the user is exposed to very high work intensity, ne-
gative pressure may occur in the head top during the
inhalation phase, which may involve the risk of leaka-
ge into the head top.
• The protection factor may be reduced if the equip-
ment is used in surroundings in which high wind
speeds occur.
• Be aware that the breathing hose might make a loop
and get caught up by something in your surrounding.
• Never lift or carry the equipment by the breathing hose.
• The filters must not be fitted directly to the head top.
• Only use Sundström filters.
• The user should take care not to confuse the
markings on a filter to standards other than EN 12941
and EN 12942 with classification of the SR 500 fan
unit when used with this filter.
2. Parts

2.1 Delivery check

Check that the equipment is complete in accordance
with the packing list, and undamaged.
Packing list
Fig. 1.
1. Fan unit SR 500, bare
2. Battery, STD
3. Battery charger SR 513
4. Belt SR 508
5. P3 R Particle filter SR 510, 2x
6. Filter adapters SR 511, 2x
7. Pre-filters SR 221, 10x
8. Pre-filter holders SR 512, 2x
9. Flow meter SR 356
10. User instructions
11. Cleaning tissue SR 5226
12. Plug kit

2.2 Accessories / Spare parts

Fig. 2.
Item Part
No.
1. Hood SR 561
2. Hood SR 562
3. Hood SR 520 M/L
3. Hood SR 520 S/M
4. Hood SR 530
5. Face shield SR 540
6. Face shield SR 570
7. Full face mask SR 200, PC visor
7. Full face mask SR 200, glass visor
8. Full face mask SR 200 Airline, PC visor H03-1012
8. Full face mask SR 200 Airline, glass visor H03-1212
9. Half mask SR 900 S
9. Half mask SR 900 M
9. Half mask SR 900 L
10. Welding shield SR 590
11. Welding shield SR 592
13. Helmet with visor SR 580
14. Welding shield/Helmet with visor
SR 584/SR 580
15. Hose SR 550
15. Hose SR 551
16. Hose SR 951
17. Twin hose SR 952
18. Gold-plated shield SR 587
19. Shield 2/3, EN 3 SR 588-1
19. Shield 2/3, EN 5 SR 588-2
20. Flow meter SR 356
21. Steel net disc SR 336
22. Asbestos kit SR 509
23. Storage bag SR 505
24. STD Standard battery, 2.2 Ah
25. HD battery, 3.6 Ah
25. Battery charger SR 513
26. Belt SR 508
26. Rubber belt SR 504
26. Belt PVC
27. Leather belt SR 503
28. Harness SR 552
29. Fan unit SR 500, bare
30. Gasket to fan unit
31. Pre-filter holder SR 512
32. Pre-filter SR 221
33. Particle filter P3 R, SR 510
34. Filter adapter SR 511
35. Pre-filter holder SR 5153
36. Particle filter P3 R, SR 710
37. Gas filter A2, SR 518
38. Gas filter ABE1, SR 515
39. Gas filter A1BE2K1, SR 597
40. Combined filter A1BE2K1-Hg-P3 R,
41. Splash cover SR 514
42. Plug kit

3. Use

3.1 Installation
See also the user instruction for the head top.
3.1.1 Battery
New batteries must be charged before they are used for
the first time. See 3.2 Assembly.
3.1.2 Filters
The choice of filters/combined filters depends on factors
such as the type and concentration of pollutants. The
fan unit may be used with only particle filters or with a
combination of particle filters and gas filters.
Ordering No.
The following filters are available for the SR 500:
• Particle filter P3 R (PAPR-P3), model number SR 510.
H06-5012
Used with an adapter. Two filters are supplied with the
H06-5112
fan. Can be combined with a gas filter.
H06-0212
• Particle filter P3 R (PAPR-P3), model number SR 710.
H06-0312
Provided with a thread, and there is no need for an
H06-0412
adapter. Cannot be combined with a gas filter.
H06-0512
• Gas filter A2 (PAPR-A2), model number SR 518. Shall
H06-6512
be combined with a particle filter.
H01-1212
• Gas filter ABE1 (PAPR-ABE1), model number SR 515.
H01-1312
Shall be combined with a particle filter.
• Gas filter A1BE2K1 (PAPR-A1BE2K1), model number
SR 597. Shall be combined with a particle filter.
H01-3012
• Combined filter A1BE2K1-Hg-P3 R (PAPRA1BE2K1-
H01-3112
Hg-P3), model number SR 599.
H01-3212
Note!
H06-4012
• The filters used must be of the same type, i.e. two
H06-4412
P3 R (PAPR-P3) or two A2P3 R (PAPR-P3), etc.
H06-8012
• When filters are changed, both filters/combined filters
must be changed at the same time.
H06-8310
T01-1216
SR 599
T01-1218
T01-3003
R01-3009
R06-0824
R06-0825
R06-0826
R03-0346
T01-2001
T06-0105
T06-0102
R06-0108
T06-0101
R06-0103
R06-0101
T06-0104
T06-0124
T06-0103
T06-0116
R06-0110
R06-0107
R06-0106
H02-0312
H02-1312
R06-0105
R01-0604
H02-1512
H02-7012
H02-7112
H02-7212
H02-7312
T06-0114
R06-0703
35